Snimač vremena sušenja

Opis

High Technology Mart Snimač vremena sušenja je vodeći mjerni instrument u industriji za svaku fazu procesa sušenja premaza. To je Linearni zapisivač vremena sušenja koji može odmah identificirati vrijeme sušenja svake trake, ima kvalitete intuitivne navigacije izbornikom i visoku ponovljivost, te može točno procijeniti svaku fazu.

Our Cube Film Applicator was used to apply this dependable device for testing the drying duration or gelation behavior of numerous paints and coatings to a 330mm x 24mm glass strip.

Over the course of 6 hours, 12 hours, 24 hours, and 48 hours, hemispherical needles move over these test tracks.

The large LCD Display and precise Graduation on the front of the Drying Time Tester provide a user-friendly and professional evaluation of the Drying Time Stages in accordance with the chosen drying time:

• Evaporation of the Solvent: Deep pear-shaped impression
•  Sol-gel Transition: Continuous track
• Dry Surface: Interrupted track
• Final Drying Stage: The needle no longer penetrates the film

 

Drying Time Recorder  – Key Features:

• Six samples can be analyzed simultaneously to save time.
• Standard speed is six, twelve, twenty-four, and forty-eight hours, and custom engineered speeds available, continuous speed choose model.
• Manufactured in accordance DIN EN 14022, ISO 9117-4, and ASTM D5895.

Drying Time Recorder – Test Standards:

• DIN EN 14022
• ISO 9117-4
• ASTM D5895

 

HTM-DTR1000

 

HTM-CFAC2

 

HTM-GS1

 

Dodatne informacije

Broj dijela	Drying Time Recorder HTM-DTR1000, Glass Strip Set HTM-GSS1, Glass Strip Holder HTM-CFAC2, Cube Film Applicator HTM-CFA1

TEHNIČKI PODACI

Broj dijela	HTM-DTR1000
Speed	6, 12, 24, 48 hours (custom engineered speeds available, continuous speed choose model)
Maximum Number of Tracks	6
Weight Set (5 grams per weight)	Set of 6 weights
Needle Set (2mm±0.05mm diameter with rounded tip)	Set of 6 needles
napon	100VAC - 240VAC 50Hz/60Hz
Testni standardi	DIN EN 14022 ISO 9117-4 ASTM D5895

GLAVNE ZNAČAJKE

• Six samples can be analyzed simultaneously to save time.
• Standard speed is six, twelve, twenty-four, and forty-eight hours, and alternative speeds are available upon request.
• Manufactured in accordance DIN EN 14022, ISO 9117-4, and ASTM D5895

STANDARDI ISPITA

• DIN EN 14022
• ISO 9117-4
• ASTM D5895

OPCIONALNI PRIBOR

Optional Accessories	Broj dijela
Glass Strip Set (Set of 60 Glass Strips)	HTM-GSS1
CasterguideGuide za Cube aplikator	HTM-CFAC2
Aplikator kockastog filma	HTM-CFA1

UKLJUČENI PROIZVODI

• Snimač vremena sušenja
• Adapter napajanja
• Potvrda o umjeravanju
• Korisnički priručnik