- made wire-woud with a rod wound around a stainless steel bar
- made of one piece of stainless steel
- Gap Sizes from 6µm - 100µm: 50%
- Gap Sizes from 100µm - 200µm: 60%
Offerynnau Profi Cymhwyso ar gyfer Cymhwyso Paent a Chloriau
-
Marchnad Uwch Dechnoleg Gorchuddwr Bariau Gwifren yw Spiral Bar Film Applicator ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. This expert Wire-Wound Bar Coater is available in the range from 6µm - 200µm with a maximum film application width of 200mm. The total length of the Spiral Bar Coater is 240mm. Modified Wire Bar Film Applicators made to customer requirements are available. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Wire Wound Spiral Bar Coater is manufactured with high precision, is available made of high quality stainless steel for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. A Wire Bar Coater Handle is optional available. The Gwneuthurwr Ffilm Bar Wifren is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Gwneuthurwr Ffilm Awtomatig. This expert Gorchuddwr Bariau Gwifren is available in two main configurations:
-
Y Bwth Chwistrellu Golchi â Dŵr yw Automatic Water Wash Coating Spray Chmaber a Automatic Water Wash Paint Spray Cabinet to safely and environmental friendly prepare Is-haenau wedi'u gorchuddio ar gyfer y Prawf Perfformiad Ffilm Paent ac Prawf gorchuddion in a safe and evironmental friendly procedure. The main advantages of this Bwth Chwistrellu Golchi â Dŵr are the safety of the operator, a higher level of cleanliness, simplifies workflows and saves time, suitable for a wider range of coatings and a wider range of paint viscosities and a wider range of drying times, the higher repeatability and the user-friendly save preparation of a high number of substradau wedi'u gorchuddio allowing for a safer, easier and faster workflow by achieving highly uniform coatings on standardized substrates. This expert Water Wash Spray Cabinet uses water to collect overspray duirng the paint spray application and filters the oversprayed paint safely using a range of precision baffles and reservoirs. A directed air flow forces the spray particles through a series of water curtains and automatically collects the paint overspray and a air ventilation system guides overspray the the exhaust filters. The savely collected overspray passed through a series of filters to cleanly and safely separate and dispose of the paint overspray. This Water Wash Paint Spray Cabinet is made of high quality materials for an extended durability with a small foorprint ideal for the application at laboratories and an extended efficiency of more than 90%. Water Wash Coating Spray Booth - Test Standards: Yr arbenigwr hwn Plât tynnu i lawr yn cael ei gynhyrchu yn unol â ASTM D823.
-
Marchnad Uwch Dechnoleg Bwrdd Cymhwyso Ffilm Gwactod yw Paint Film Drawdown Instrument and a Coating Application Surface for the manual application of inks, paint films, coatings and similar substances on substrates and drawdown cards in accordacne with ASTM D823. This expert Vacuum Film Application Bed is used for the manual paint film application similiar to the Automatic Vacuum Film Applicator, however, the Paint Film Application is performed manually. This Vacuum Coating Application Bed is manufactured with highest precision to guarantee a very smooth surface, the included Vacuum System holds Drawdon Cards well on the Vacuum Table Surface to guarantee reliable results with the manual film application with high accuracy and high repeatbility. This expert Vacuum Bed is made of one piece of high quality and hardened Aluminum to guarantee the high quality and the durability to applies consistent and repeatable paint films and coatings. Vacuum Coating Application Bed - Key Features:
- Gwneud cais dibynadwy ar ffilm paent
- Made of high quality aluminum
- Extremely smooth Vacuum Table especially hardened
- Cywirdeb ardderchog
- Manwl gywirdeb rhagorol
- Ailadroddadwyedd rhagorol
- Fits with most standradized Film Applicators
- Gwneud cais i ffilm paent heb dirgryniad
- Hawdd i lanhau
- Haws i'w ddefnyddio
- High quality materials
- Dyluniad gwydn
- Dylunio Ergonomig Arbenigol
- Voltage 100VAC - 240VAC 50Hz/60Hz
-
Y Gwneuthurwr Ffilm ar Ffurf U yw Gwneuthurwr Ffilm Dwy Ochr ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Gwneuthurwr Ffilm ar Ffurf U is manufactured with high precision, is available made of high quality stainless steel and high quality anodized aluminum for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Gwneuthurwr Ffilm Dwy Ochr is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Gwneuthurwr Ffilm Awtomatig. The Gwneuthurwr Ffilm ar Ffurf U yw Two Sided Applicator with 4 specified Gap Sizes. The Gwneuthurwr Ffilm Dwy Ochr is used to apply a wet paint film onto a substrate or onto a sample surface. The wet paint film correlates with the dry paint film:
- Gap Sizes from 15µm - 100µm: 50%
- Gap Sizes from 100µm - 300µm: 60%
- Gap Sizes from 300µm - 500µm: 80%
- Gap Sizes larger than 500µm: 90%
-
Y Gwneuthurwr Ffilm Sgwâr yw Gwneuthurwr Ffilm Pedair Ochr ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Gwneuthurwr Ffilm Sgwâr is manufactured with high precision, is available made of high quality stainless steel and high quality anodized aluminum for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Four Sided Square Film Applicator is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Gwneuthurwr Ffilm Awtomatig. The Gwneuthurwr Ffilm Sgwâr yw Four Sided Applicator with 4 specified Gap Sizes. The Gwneuthurwr Ffilm Pedair Ochr is used to apply a wet paint film onto a substrate or onto a sample surface. The wet paint film correlates with the dry paint film:
- Gap Sizes from 15µm - 100µm: 50%
- Gap Sizes from 100µm - 300µm: 60%
- Gap Sizes from 300µm - 500µm: 80%
- Gap Sizes larger than 500µm: 90%
-
Marchnad Uwch Dechnoleg Gwneuthurwr Ffilm Micrometrig yw Gwneuthurwr Ffilm Addasadwy ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823 and ASTM D3022. This expert Adjustable Micrometer Film Applicator adjusts the Wet Film Thickness in the range from 0µm - 5000µm with two precision Micrometers available with a graduation or a with a digital display to apply paint film and coatings in the range from 0µm - 5000µm in increments of 10µm. This Gwneuthurwr Ffilm Micrometrig is manufactured in accordance with ASTM D823.
-
Y Gwneuthurwr Fframiau Ffilm yw Gwneuthurwr Ffilm Pedair Ochr ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Gwneuthurwr Fframiau Ffilm is manufactured with high precision, is available made of high quality stainless steel and high quality anodized aluminum for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Gwneuthurwr Ffilm Pedair Ochr is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Gwneuthurwr Ffilm Awtomatig. The Gwneuthurwr Fframiau Ffilm yw Four Sided Applicator with 4 specified Gap Sizes. The Gwneuthurwr Ffilm Pedair Ochr is used to apply a wet paint film onto a substrate or onto a sample surface. The wet paint film correlates with the dry paint film:
- Gap Sizes from 15µm - 100µm: 50%
- Gap Sizes from 100µm - 300µm: 60%
- Gap Sizes from 300µm - 500µm: 80%
- Gap Sizes larger than 500µm: 90%
-
Marchnad Uwch Dechnoleg Plât tynnu i lawr yw Paint Film Drawdown Surface and a Coating Application Instrument for the manual application of inks, paint films, coatings and similar substances on substrates and drawdown cards in accordacne with ASTM D823. This expert Coating Application Drawdown Plate is used for the manual paint film application similiar to the Gwneuthurwr Ffilm Awtomatig, however, the Paint Film Application is performed manually. This Film Application Drawdown Surface is manufactured with highest precision to guarantee a very smooth glass surface, the integrated Drawdown Card Holder holds Drawdon Cards well on the Coating Application Surface to guarantee reliable results with the manual film application with high accuracy and high repeatbility. This expert Plât tynnu i lawr is made of high quality glass to guarantee the high quality and the durability with high quality skid-proof rubber feet to apply consistent and repeatable paint films and coatings. Drawdown Surface - Key Features:
- Gwneud cais dibynadwy ar ffilm paent
- Made of high quality glass
- Skid-proof Rubber Feet
- Extremely smooth Glass Table especially hardened
- Cywirdeb ardderchog
- Manwl gywirdeb rhagorol
- Ailadroddadwyedd rhagorol
- Fits with most standardized Film Applicators
- Gwneud cais i ffilm paent heb dirgryniad
- Hawdd i lanhau
- Haws i'w ddefnyddio
- High quality materials
- Dyluniad gwydn
- Dylunio Ergonomig Arbenigol
-
Y Gwneuthurwr Ffilm Ciwbig yw Gwneuthurwr Ffilm Dwy Ochr ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Gwneuthurwr Ffilm Ciwbig is manufactured with high precision, is available made of high quality stainless steel and high quality anodized aluminum for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Two Sided Cube Film Applicator is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Automatic Drying Time Recorder. The Gwneuthurwr Ffilm Ciwbig yw Two Sided Applicator with 4 specified Gap Sizes. The Gwneuthurwr Ffilm Dwy Ochr is used to apply a wet paint film onto a substrate or onto a sample surface. The wet paint film correlates with the dry paint film:
- Gap Sizes from 15µm - 100µm: 50%
- Gap Sizes from 100µm - 300µm: 60%
- Gap Sizes from 300µm - 500µm: 80%
- Gap Sizes larger than 500µm: 90%
-
Marchnad Uwch Dechnoleg Canllaw castio yw Cube Film Applicator Guide ar gyfer y Paint Film Application and the Coating Film Application when preparing Glas Substrates and applying coatings on Glass Substrates to perform a Drying Time Test with the Automatic Drying Time Recorder. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Cube Film Application Guide is manufactured with high precision, is available made of high quality stainless steel for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Cube Applicator Casterguide is essential for film application testing ac appearance testing. Cube Applicator Casterguide - Key Features:
- Expert Casterguide
- Made of a single piece of stainless steel for higher accuracy and extended lifetime
- High quality scientifically hardened materials for an extended lifetime
- Uchel gywirdeb
- Ailadroddadwyedd rhagorol
- Dyluniad gwydn
- Carrying Box
- Extended Lifetime
-
Y Gwneuthurwr Ffilm Adar yw Gwneuthurwr Ffilm Un Ochr ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Gwneuthurwr Ffilm Adar is manufactured with high precision, is available made of high quality stainless steel and high quality anodized aluminum for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Gwneuthurwr Ffilm Un Ochr is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Gwneuthurwr Ffilm Awtomatig. The Gwneuthurwr Ffilm Adar yw One Sided Applicator with 4 specified Gap Sizes. The Gwneuthurwr Ffilm Un Ochr is used to apply a wet paint film onto a substrate or onto a sample surface. The wet paint film correlates with the dry paint film:
- Gap Sizes from 15µm - 100µm: 50%
- Gap Sizes from 100µm - 300µm: 60%
- Gap Sizes from 300µm - 500µm: 80%
- Gap Sizes larger than 500µm: 90%
-
Y Gwneuthurwr Ffilmiau Baker yw Gwneuthurwr Ffilm Pedair Ochr ar gyfer y Paint Film Application and the Coating Film Application when preparing substrates and applying coatings on sample surfaces in accordance with ASTM D823. When preparing coated subtrates and applying a paint film on samples surfaces highest precision is required to achieve reliable and repeatable result for research and quality management. This expert Gwneuthurwr Ffilmiau Baker is manufactured with high precision, is available made of high quality stainless steel and high quality anodized aluminum for an extended lifetime, is user-friendly, easy to clean and includes a carrying box and a calibration certificate. The Gwneuthurwr Ffilm Pedair Ochr is essential for film application testing ac appearance testing and is available in a wide range of models with different gap sizes for the manual film application and the automatic film application in combination with the Gwneuthurwr Ffilm Awtomatig. The Gwneuthurwr Ffilmiau Baker yw Four Sided Applicator with 4 specified Gap Sizes. The Gwneuthurwr Ffilm Pedair Ochr is used to apply a wet paint film onto a substrate or onto a sample surface. The wet paint film correlates with the dry paint film:
- Gap Sizes from 15µm - 100µm: 50%
- Gap Sizes from 100µm - 300µm: 60%
- Gap Sizes from 300µm - 500µm: 80%
- Gap Sizes larger than 500µm: 90%
English 
Dutch (Formal) 
Swedish 
Norwegian 
Norwegian 
French 
Italian 
Spanish 
Irish 
Danish 
Dutch (Belgium) 
Finnish 
German 
Greek 
Scottish Gaelic 
Welsh 
Portuguese